Anycubic Wash and Cure 3 vs SUNLU S2 Single-Spool Filament Dryer
Head-to-head spec comparison to help you pick the right environment upgrade for your needs.
Anycubic
$99
SUNLU
$79
Spec-by-Spec Comparison
| Spec | Anycubic Wash and Cure 3 | SUNLU S2 Single-Spool Filament Dryer |
|---|---|---|
| Category | Resin workflow | Filament dryer |
| Role | Wash and cure station | Single-spool diagnostic dryer |
| Max Temp | 0 C | 70 C |
| Capacity | Small resin builds | 1 spool |
| Active Heat | No | Yes |
| Active Airflow | No | Yes |
| Humidity Readout | No | Yes |
| Print Through | No | Yes |
| Ventilation | No | No |
| Resin Workflow | Yes | No |
| Abrasive Ready | No | No |
| Best Materials | SLA/MSLA resin | PETG, TPU, PLA+ |
| Footprint | Post-processing station | Compact bench box |
| Price | $99 | $79 |
| Rating | 8.8/10 | 8.6/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
Anycubic Wash and Cure 3
Pros
- Combines the two resin post-processing steps most beginners underbuild: controlled washing and consistent curing.
- A dedicated station reduces the messy container shuffle that spreads uncured resin around a desk.
- Clear fit for small-format resin printers where a full industrial workflow is unnecessary.
- Better safety habit builder than improvising with random jars and inconsistent UV exposure.
Cons
- Does not replace gloves, eye protection, ventilation, or resin handling discipline.
- Wash-and-cure size must be checked against the largest build volume you actually print.
- A cleaner station can still become contaminated if tools and lids are not separated.
SUNLU S2 Single-Spool Filament Dryer
Pros
- Single-spool format is the right size for diagnosing whether wet filament is actually the cause of stringing, popping, and dull surfaces.
- Active heat and a compact footprint make it easier to leave on the bench than a food-dehydrator workaround.
- Print-through path supports long PETG or TPU prints without moving the spool back into room air.
- Good middle ground for users who need real drying but do not yet need a four-spool station.
Cons
- One spool at a time becomes frustrating once you rotate several colors or materials every week.
- You still need dry storage boxes for partial rolls after the drying cycle.
- No single dryer can fix under-extrusion, retraction, or temperature mistakes that only look like moisture.
Our Verdicts
Anycubic Wash and Cure 3
The Anycubic Wash and Cure 3 is the resin workflow product we would put in front of almost every small-printer beginner. It does not make resin harmless, but it turns post-processing into a repeatable station instead of a messy ritual spread across the whole bench.
SUNLU S2 Single-Spool Filament Dryer
The SUNLU S2 is the most practical first filament dryer for a small Print Climate bench. It gives you a repeatable moisture-control step without forcing a huge workstation change, and it pairs naturally with sealed dry boxes once you have more than two active rolls.
More Comparisons
Anycubic Wash and Cure 3 vs SUNLU S4 Four-Spool Filament DryerSUNLU S2 Single-Spool Filament Dryer vs SUNLU S4 Four-Spool Filament DryerAnycubic Wash and Cure 3 vs Creality Space Pi SE Filament DryerCreality Space Pi SE Filament Dryer vs SUNLU S2 Single-Spool Filament DryerAnycubic Wash and Cure 3 vs Polymaker PolyDryer BoxPolymaker PolyDryer Box vs SUNLU S2 Single-Spool Filament DryerAnycubic Wash and Cure 3 vs Filament Storage Box 4-Pack with HygrometersFilament Storage Box 4-Pack with Hygrometers vs SUNLU S2 Single-Spool Filament Dryer